A500 Signature Edition, Light Palisander (B Stock)
50 PAIR LIMITED SIGNATURE EDITION
Prices are per pair and include free worldwide shipping.
Delivery: 2-5 days
What has changed on the A500 Signature Edition?
✓ Made in Denmark.
✓ Purifi Ultra Long Stroke Low Distortion Woofers
✓ Optional Cardioid Mastertuning available
✓ Internal Silver wires with teflon isolation.
✓ Rare modified Palisander veneer
✓ HDF cabinet construction for improved rigidness.
Note: Only EU or US power cord included for the speakers.
B-stock is unboxed speakers which have either been returned by a previous customer or a reviewer. The speakers are inspected and categorized as great condition and come with full warranty and “45 days trial”. If you don’t like the product, you can return it for a refund within the trial period.
*Please note that on ANY B stock product, you are responsible for sending the product back and pay the costs associated with it.
SHIPPING, TAX & IMPORT COSTS INCLUDED
The new A500 Signature Edition is something truly special
- special in the sense that it is a standmount speaker, that has all the advantages of a big floorstander speaker, without any of its drawbacks. It's in many ways what we consider, the perfect speaker. It's both compact, achieves extremely deep tight bass, high SPL levels with super low distortion, while also being very easy to place in any room, and even very close to the back wall thanks to its optional Cardioid Mastertuning.
So how is this possible?
For this design, we have used every bit of knowledge we have learned over the years of building active DSP based speakers, combined with the world's best performing woofers from Purifi, Denmark. The woofers have been custom-made, to fit the rest of the A500’s design. In comparison to the Original A500, the Signatures uses a front woofer design with dual voice coil structure, which means we can use 2 x 150 watts for this woofer alone.
What makes the Purifi woofer special, is its ability to move over twice the amount of air compared to a normal 6.5” woofer, while retaining an ultra low distortion - even at high SPL levels! The internal cables have also been upgraded to silver wires, based on the great experience we had doing this in our S400 Signature Edition speakers. The end result is an extraordinarily powerful speaker, with a new level of clarity in both midrange and bass. If you are interested in reading more about the groundbreaking technologies that goes into making these Purifi woofers, be sure to check the more detailed text further down.
As all of our SE speakers, the A500 SE is hand build in Denmark in a new raw light Palisander veneer, as only 50 pairs will be produced and sold in this finish. None of our other speakers will feature this veneer, making these speakers even more unique.
|TECHNICAL SPECIFICATIONS||Table header 1|
|Amplifiers||4 x 150 RMS / 330 Peak watts class D (each speaker) |
|Operating principle||2.5-way sealed enclosure / 2-way with cardioid back woofers |
|Tweeter||1 x 0,74" Custom fine weave soft fabric textile with CDC aluminum waveguide|
|Mid / woofer||1 x 6.5" PURIFI Extended Stroke Driver
with Ultra Low Distortion, Custom made with Dual Voice Coil|
|Rear / subwoofer||1 x 6.5" PURIFI Extended Stroke Driver with Ultra Low Distortion|
|Frequency response||25 - 40.000 Hz +/- 1.5dB (can change with mastertunings)|
|DSP||Quad Core Processor|
|DAC chip||4 x CS4398 (each speaker) |
|Crossover point||150 hz / 2800 hz (can change with mastertunings) |
|Wireless||WiSA 24 bit / 96khz. Can be paired across brands up to 7.1 setup|
|Cabled analogue input||24 bit / 192khz ADC / Balanced / Unbalanced XLR / 20k ohms input impedance|
|Measurements (h x w x d)||365 x 180 x 280 mm (14.4” x 7” x 11”) |
|Input voltage||100-240 Volts AC auto adjusting (1.8 m IEC C13 EU or US power cords incl.)|
|Weight||9.7 kg each / 24,7 kg shipped|
|Warranty||10 years on speakers / 4 years on electronics|
|Cabinet||15mm HDF with two separate internal cabinets for each woofer|